With smart switching technology, all your computer audio - including the ringing of incoming calls - comes through your normal speakers. Pick up the handset, and your speakers are muted with the audio transferred to the internal speaker in the handset! No more plugging and unplugging headsets - just hang up the Lets-Chat handset, and audio is transferred back to your normal computer speakers!
Lets-Chat HandsetThe Lets-Chat? handset is perfect for people who like the look and feel of a standard telephone, but want the quality of a superior speaker and noise-cancelling microphone. If you don't like using headsets or other fancy contraptions, but want your Internet phone conversation to be as natural as a standard phone conversation, then this handset is for you. The handset has the feel of a normal telephone and its solid build means you will not feel like you are using a cheap piece of plastic.
With its patented switching technology, using the Lets-Chat? handset means that when you receive a VoIP phone call, you hear the ringing on your standard PC speakers. To answer the call, simply click on the accept call button on your VoIP application, and pick up the handset. Once the handset is picked up, your standard PC speakers are muted and you can talk like you would into a standard telephone.
?
Features
- No drivers required! No spare USB port required! The Lets-Chat? connects to the microphone and speaker plugs on your soundcard.
- Auxiliary speaker jack: Instead of plugging your speakers into your sound card, plug your speakers into the auxiliary jack found on the Lets-Chat? cord, and plug the Lets-Chat? line jacks into your sound card.
- Automatic switching between speakers and handset! Pick the handset up, and the patented switch disconnects your speakers and connects the handset to the soundcard. Put the handset either back in its holder or flat on the desk, and the handset switches off while your speakers switch back on! No need to configure your software with a 'special audio device' - the handset manages it all for you!
- High quality, noise cancelling microphone.
- Volume control on the handset in a convenient position. This allows you to adjust the handset volume independently of the volume of sound coming out of your speakers.
- A holder which can be mounted on the side of your monitor to hold the handset when not in use. Putting the handset in the holder also activates the switch to turn the handset off and direct sound back to your speakers.
- The Mylar speaker in the handset means that it will not cause magnetic interference with your monitor.
- A 2.5m spiral cord means you can still use the handset even if your PC is under your desk.
Lets-Chat? is perfect for any voice over IP application - including Skype, Firefly, Windows Messenger and any other Internet chat software.
For a customised voice over IP solution with the Lets-Chat handset, please
contact us
?
Technical Specifications
| Microphone Characteristics | | Speaker Characteristics |
|---|
| Type | Acoustic Noise Cancelling, Electret Condenser | | Power | Powered by a bias voltage supplied from sound card | | Operating voltage | 1.5V - 12 V (3.0V typical) | | Frequency Range | 50 - 14 000 Hz | | Output Impedance | 2k ohm | | Sensitivity | -58 dBV | | Current drain | 0.5 mA max | | S/N ratio | 56 dB min | | Input cord | 2.5 m with 3.5 mm stereo plug |
| | | Type | Dynamic, 27 mm Mylar Cone | | Impedance | 32 ohm at 1 kHz from sound card | | Frequency Response | 50 - 15 000 Hz | | Rated Input Power | 100 mW from sound card | | Input cord | 2.5 m with 3.5 mm stereo plug and parallel 3.5 mm stereo jack |
|
